Electrolytic Capacitors (Mixed values: 1µF to 2200µF)

The Mixed Aluminum Electrolytic Capacitor Kit is a set of standard polarized radial capacitors. The kit covers values from 1 µF up to 2200 µF. These capacitors are made for through‑hole PCB mounting and for use on breadboards. The Mixed Aluminum Electrolytic Capacitor Kit is ideal for smoothing power supplies decoupling voltage rails buffering energy and coupling audio signals. Each capacitor in the Mixed Aluminum Electrolytic Capacitor Kit has markings for value and voltage. The Mixed Aluminum Electrolytic Capacitor Kit also has a stripe on the cathode lead that shows polarity. This stripe stops the Mixed Aluminum Electrolytic Capacitor Kit from being connected during assembly. – Wide Value Spectrum: The Mixed Aluminum Electrolytic Capacitor Kit includes low‑capacitance values such as 1 µF and 10 µF for decoupling. The Mixed Aluminum Electrolytic Capacitor Kit also offers high‑capacity values such as 1000 µF and 2200 µF for reservoirs. – Effective Power Ripple Smoothing: The Mixed Aluminum Electrolytic Capacitor Kit stores a lot of charge. This storage removes 50 Hz/60 Hz and 100 Hz/120 Hz AC ripple after bridge rectifiers. – Clear Polarity Identification: The Mixed Aluminum Electrolytic Capacitor Kit shows a negative (‑) stripe on the outer case. The Mixed Aluminum Electrolytic Capacitor Kit also uses negative lead lengths to avoid mistakes when populating a board. – Standard Through‑Hole Pitch: The Mixed Aluminum Electrolytic Capacitor Kit uses industry‑standard lead spacing from 2.0 mm, to 7.5 mm. The Mixed Aluminum Electrolytic Capacitor Kit fits perforated prototyping boards, stripboards and standard PCBs. – Stable Thermal Performance: The Mixed Aluminum Electrolytic Capacitor Kit is rated for operation up to +85 °C or +105 °C. The Mixed Aluminum Electrolytic Capacitor Kit gives service life in power converter modules.